All Steelhead Flies

Here are twelve great winter, custom tied, Steelhead flies - Winter Moal Collection. These flies all have been tested, and have caught many, many Steelhead.

Size: 3 inch Moal Leeches

• Custom Pink Flash Moal
• Custom Pink Tail Moal
• Custom Improved Methow Moal
• Custom Black and Blue Moal Leech

Status: Tied and ready to ship

The Hartwick's Flashtail Tube series is tied in a style to provide a lot of flash and a moderate size profile. A brass cone is used to hold the marabou in a position so the profile will not collapse.

Great Tie, and this is a Steelhead catcher!

Senyo's GL Predator Scandi: Greg Senyo likes to blend traditional Atlantic salmon and steelhead tying techniques with modern synthetic materials, and he has done that with the Predator Scandi series. Tied on a 25mm Senyo shank and using the Senyo Predator Wrap, this fly sparkles in the water. As with all of Greg's patterns, the Gamakatsu hook is attached point down.

Nice Steelhead Fly!

The Trailer Trash by Ken Morrish is a large, Intruder-like pattern that makes no apologies. Like many, Ken admittedly was inspired by the design features of the Intruder to create a large profile fly that has great movement and little bulk. At nearly 4-5 inches, this large creature swims frequently in Steelhead rivers around the West, at risk of being eaten in a violent manner. Pacific Salmon and Sea-run Browns also like the way it tastes.

A two stage Intruder with soft Marabout that swims.

A very nice tie up by Aqua Flies.

Steelie Piglets are tied on a 1-inch plastic tube with a 1/4-inch brass cone at the front for added weight. Comes with size 2 Tube hook.

Good all season Steelhead fly.

The traditional summer steelhead flies were developed on the fabled rivers of the Pacific Northwest, such as the Umpqua, Deschutes, and the Rogue. Our traditional summer steelhead flies are tied on a black nickel, up-turned eye, salmon hook. Special orders can be tied on Gamakatsu, Daiichi, or Maruto hooks.

A very nice tie.

A great Steelhead Pattern for Summer and Fall.

Size: 6

The Lady Caroline | first mentioned in George Kelson's "The Salmon Fly", 1895 |

The Classic Lady Caroline Fly is arguably one of the most recognizable Spey patterns; however unlike traditional Speys, the Lady C is tied with a tail. Tied by (most likely) Geordie Shanks, who was head ghillie at the Gordon Castle (as mentioned in A. E. Knox's Autumns on the Spey). The fly was named after Caroline Elizabeth Gordon Lennox (1844-1934) who was daughter of the Duke of Richmond and Gordon at Gordon Castle. 

This fly was tweaked from "Evo Mini" with the addition of the egg fireball and a few other changes.

EVO Fireball Bug with Eyes a getting deeper version of EVO Fireball Bug

I designed EVO so it can be fished with either a Skagit or Scandi line. I use a lot of the same proven color patterns that I know work but every fly pattern has it own silhouette, movement, sinkability rate, and castability.

Also see:

Evo Bunny Supreme (click here)

Evo Bunny (click here)

EVO Swimming in tank (+)

Also see: (EVO Fireball Bug) - easier to cast, lots of movement.

Materials:

Senyo's Aqua Scandi: With a marabou wing and incorporating the new Aqua Veil, this fly has a similar profile to the Predator Scandi, but a touch smaller. Rigged with a Gamakatsu Octopus hook.

Tied on a 25mm Senyo shank.

Nice Steelhead Fly!

The Intruder has quickly become one of the most popular steelhead patterns on the West Coast. It is a large fly that was designed by the West Coast steelhead guide Ed Ward, with the help and feedback of fellow anglers Scott Howell, Jerry French, and Dec Hogan. Since its inception, there have been numerous variations, and it is safe to say that it is more of a style of fly rather than a pattern.

Our Sili-Leg Intruders are tied on medium length 35mm Waddington Shanks with 3/16-inch brass eyes. Stock flies come with a Gamakatsu Octopus size 2 hook.

Also See:

Lots of movement - good natural colors. Proven fish getting nymph. Size 6

Nymphing for steelhead and sea run browns is a very effective technique. In the rivers of the Pacific Northwest and the Midwest, nymphing is quickly becoming the go-to method for many anglers fishing for steelhead. The hooks used for our nymphs are stout enough to hold the heaviest steelhead or the sea run browns of Tierra del Fuego.

Nicely tied Steelhead Intruder fly. Great Steelhead fly colors. This fly says bite me!

Stu's Barred Ostrich Intruders are tied using barred ostrich that we dye in house. The intruder is on an Aqua Flies 43mm shank with 5/32" brass eyes. Stock flies rigged with an AquaTalon hook.

Evo Bunny, new for 2018.  The small size is tied on a Senyos Articulated Shank, 25mm, Black

Tied with a trailing egg. This fly has lots of movement with a free moving Rabbit wing.

Sizes: 2 - 2.5 inch

See all Evo Bunny Flies (click Here)

See Evo Bunny Supreme ***** (click Here) 

Dave Robinson with a 12 lb pound hatchery Steelhead caught uysing a Evo Bunny, Black/Purple/Red - Chartreuse Butt

A very nice tie up by Aqua Flies.

Steelie Piglets are tied on a 1-inch plastic tube with a 1/4-inch brass cone at the front for added weight. Comes with size 2 Tube hook.

Good all season Steelhead fly.

Fall Muddler custom tie by Grabflies.

A very good summer/fall Steelhead Muddler Minnow pattern. Design for rivers like the Klickitat and Deschutes... This muddler is tied on a shank with a trailing #2 Owner hook. Trailing hooks are much better for tail nipping takes and help  barbless hook stay hooked much better, plus do much less damage to wild fish for releasing.

Tied with a rabbit wing.

Fly is 1.5 to 2 inches longer. Fishes very high in the water column on a dryline. This muddler has lots of action.

Works great summer into fall for Steelhead.

These new wide-profile cones create a turbo vortex at the front of a tube fly. The turbo cone gives the fly a unique swimming action. The action combined with the soft materials, which pulsate to mimic breathing, produces a fly that drives fish crazy. Whether fishing in the slowest or hardest of currents, the fly will move and pulsate like no other pattern. In addition to the unique movements, the turbo cone also provides a little bit of weight to help get the fly down. Our Turbo Cone Tube Flies are tied on a 1.25-inch tube with a 10mm turbo cone.

Comes with Size 2 trailing hook.

Tied on a 15mm shank, this little intruder has all the characteristics of its big brother: it moves and breathes while maintaining a profile.

Great when smaller Steelhead flies are needed. Good in Summer, Fall, and Winter

A custom design by Grabflies. Design idea came from combining the famous Skagit Minnow with the new Intruder style trailing hook. This fly has lots of action in the water with a large profile.

This Neo Skagit Leech is a smaller version of the original Skagit Leech. It is tied with a hidden .25" nickle bead. The hidden bead helps prop up the Marabou which has stiff Guinea and Prop Hackle in front of it. The fly swims different, and snags less as the bead will not snag on rocks.

This color pattern is very good for early winter Steelhead, Kalum River Winter Steelhead, and coastal Steelhead, and any where that pink does well.

Size: 3 inches| Size 2 Owner hook (Now available with #1 OPST hook)

Fly is tied and glued in every step of it's construction - tied to last. 

Also see other Neo Skagit Leeches  (click here)

Greg's Kriller

Constructed on the banks of the Kanektok River the killer krill, or Kriller, was designed for maximum castabilty as well as its flaring motion when swinging across hydraulic “fences” in the water column. With the weight of the dumbbell eyes at the back of the shank, the Kriller swings deep with more of a downward-diagonal profile than most traditional patterns. A devouring size for both chrome Chinook and Steelhead, having the eyes closer to the hook attracts some of the most aggressive eats you can find near tidewater!

This fly was tweaked from "Evo Mini" with the addition of the egg fireball and a few other changes.

 EVO Fireball Bug a great all season Steelhead fly. This fly can be casted easily.

I designed EVO so it can be fished with either a Skagit or Scandi line. I use a lot of the same proven color patterns that I know work but every fly pattern has it own silhouette, movement, sinkability rate, and castability.

Also see:

Evo Bunny Supreme (click here)

Evo Bunny (click here)

EVO Swimming in tank (+)

Materials:

A custom design by Grabflies. Design idea came from combining the famous Skagit Minnow with the new Intruder style trailing hook. This fly has lots of action in the water with a large profile.

This Neo Methow Skagit Leech is a smaller version of the original Methow Skagit Leech, which has more black in it. It is tied with a hidden nickle bead - smaller sizes lighter cone. The hidden bead helps prop up the Marabou. The fly swims different, and snags less as the bead will not snag on rocks.

Regular size has a hidden .25 inch bead, and is three inches long.

Fly is tied and glued in every step of it's construction - tied to last.

Size: 2.5, 3 inches| Size 2 Owner hook (want a bigger hook for big Steelhead and Salmon -

Neo Skagit Leech, Methow CW (Clear Water (Click Here)

Neo Skagit Bijou Leech, Methow (Click Here)

Also see other Neo Skagit Leeches  (click here)

Senyo's OCD is a great fly in low water conditions because it's unweighted and 3 1/2 inches long. Tied using Senyo's articulated shank, ostrich, and Angel Hair, for a fly that swims well in the water. Shank length: 25mm.

Size 2 Intruder hook.

Very nice tie up by Aqua Flies.

These new wide-profile cones create a turbo vortex at the front of a tube fly. The turbo cone gives the fly a unique swimming action. The action combined with the soft materials, which pulsate to mimic breathing, produces a fly that drives fish crazy. Whether fishing in the slowest or hardest of currents, the fly will move and pulsate like no other pattern. In addition to the unique movements, the turbo cone also provides a little bit of weight to help get the fly down. Our Turbo Cone Tube Flies are tied on a 1.25-inch tube with a 10mm turbo cone.

Comes with Size 2 trailing hook.

Using long flowing materials is one of the key Intruder features. The rhea is a small South American ostrich-like bird with long flowing feathers, and it's the perfect match for the Intruder. The use of rhea was popularized by Paul Miller a number of years ago.

Stu's Rhea Intruders are tied on 40mm shanks with 5/32-inch brass eyes. Stock flies come with a Gamakatsu Octopus hook.

Great Steelhead Fly

Good Stone Fly Nymph, size 6

Tied by Aqua Flies

Nymphing for steelhead and sea run browns is a very effective technique. In the rivers of the Pacific Northwest and the Midwest, nymphing is quickly becoming the go-to method for many anglers fishing for steelhead. The hooks used for our nymphs are stout enough to hold the heaviest steelhead or the sea run browns of Tierra del Fuego.

The Spider Leech is a new name for the Rubber Leg K Moal.

NEW for 2019, now tied with Micro Barred Voodoo Fibers - better in softer water, more movement, and the fly is .50 less expensive.

This fly has a weighted bead but it is tied in the rear some - hidden. This effects how the fly swims/swings through the river. It has a flatter/level angle. Also the hidden 1/4 inch nickel bead gives the fly more silhouette - bigger shoulder. NEW for 2017 summer. Size: 2.5 inches.

Moal leeches are tied entirely on a string with a trailer hook at the back. This gives the fly greater action than a fly tied on a rigid hook. More fish are landed with the Moal fly as well.

Custom Moal Leeches are tied by Grabflies.com in the good old USA. Moal's are tied using the best materials on the market and are tied to last (super glue, Berkley Fireline Braid 20 LB (double over for 40 LB strength) and, quality hooks.

Read The Fish Magnet Gear Guide Review for this fly (Click Here) 

 

A custom design by Grabflies. Design idea came from combining the famous Skagit Minnow with the new Intruder style trailing hook. This fly has lots of action in the water with a large profile.

Great fly for winter Steelhead, BC Steelhead, King Salmon, Chum Salmon - option to select Owner #1 hook

This Neo Skagit Leech is a smaller version of the original Skagit Leech. It is tied with  a hidden .25" nickle bead. The hidden bead helps prop up the Marabou which has stiff Guinea and Prop Hackle in front of it. The fly swims different, and snags less as the bead will not snag on rocks.

Size: 2.5 - 3.25 inches

Hook size: # 2 Owner | #1 OPST. (Select below)

Fly is tied and glued in every step of it's construction - tied to last. 

Also see other Neo Skagit Leeches  (click here)

This is a short tube with a hefty amount of marabou tied in at the front, giving a large profile and lots of movement.

Easy to cast Steelhead fly with lots of movement. Comes with size #2 Owner hook and hook holder tubing.

Size: 2.5 inches

The Cyclops Leech is designed to get down and keep a profile while moving like a snake. With the 7/32" tungsten bead, this fly will break through the toughest of currents. Rigged with a Gamakatsu Octopus hook.

Good King Salmon and Winter Steelhead Fly. Tied by Aqua Flies

Size 1/0 hook

A nice well tied skating muddler imitation. Great for early morning and late evenings for summer and fall Steelhead. Marabou gives the fly lots of action.

Size 4 hook

Using long flowing materials is one of the key Intruder features. The rhea is a small South American ostrich-like bird with long flowing feathers, and it's the perfect match for the Intruder. The use of rhea was popularized by Paul Miller a number of years ago.

Stu's Rhea Intruders are tied on 40mm shanks with 5/32-inch brass eyes. Stock flies come with a Gamakatsu Octopus hook.

Great Steelhead Fly

This fly is now tied in a classic tie up, and has been a very effective Summer/Fall Steelhead fly.

For lower water and summer conditions this same color pattern can be found in this fly and Skagit Leech Lite.

See other Neo Classic patterns (Click Here)

Tied on a:

• 2051 Alec Jackson Black Spey Hook, Size 3
• Flashabou
• Chartreuse Veevus Holograophic Tinsel, Large
• Black UV Ice Dub
• Black Saltwater Neck Hackle
• Black Ostrich Herl, 10-12 inch
• Guinea Hackle
• Red VEEVUS THREAD 8/0

The Spider Leech is a new name for the K Moal, with the addition of Micro Barred Voodoo Fibers and new colors. The name came from the spider leg (fly only has six legs, not eight) look when hanging from my drying rod when I tie them. See photo below.

This fly is a good Sculpin imitation.

This fly has a weighted bead but it is tied in the rear some - hidden. This effects how the fly swims/swings through the river. It has a flatter/level angle. Also the hidden 1/4 inch nickel bead gives the fly more silhouette - bigger shoulder. NEW for 2017 summer. Size: 2.5 inches.

A custom design by Grabflies. Design idea came from combining the famous Skagit Minnow with the new Intruder style trailing hook. This fly has lots of action in the water with a large profile.

Taking the most successful Steelhead fly and making it even better!

This Neo Skagit Ostrich Leech is like the Neo Skagit Leech, Methow but it is tied with propped up (hidden nickle bead + Intruder Prop hackle) trailing Ostrich, then marabou tied ahead of it. This gives the fly more silhouette and action. The fly swims different, and snags less as the bead will not snag on rocks.

Fly is tied and glued in every step of it's construction - tied to last.

Size: 2.75 - 3.25 inches | Size 2, owner (.25" smaller), and size 1 OPST Barbless Hook (strong)

Also see:

Neo Skagit Leech, Methow CW (Clear Water (Click Here)

A custom design by Grabflies. Design idea came from combining the famous Skagit Minnow with the new Intruder style trailing hook. This fly has lots of action in the water with a large profile.

This Neo Skagit Leech is a smaller version of the original Skagit Leech. It is tied with a hidden .25" nickle bead. The hidden bead helps prop up the Marabou which has stiff Guinea and Prop Hackle in front of it. The fly swims different, and snags less as the bead will not snag on rocks.Tied with Lady Amherst.

A special fly tied for the Klickitat river, WA. Works great especially for early to mid summer Steelhead.

Size: 3 inches| Size 2 Owner hook

Fly is tied and glued in every step of it's construction - tied to last. 

Also see other Neo Skagit Leeches  (click here)

See Neo Skagit Bijou Leech, Klickitat (Click Here)

See Klickitat Skagit Leech (Click Here)

Nymphing for steelhead and sea run browns is a very effective technique. In the rivers of the Pacific Northwest and the Midwest, nymphing is quickly becoming the go-to method for many anglers fishing for steelhead. The hooks used for our nymphs are stout enough to hold the heaviest steelhead or the sea run browns of Tierra del Fuego.

Size: 6

This is a top producing steelhead fly, and tied on the sleek looking Alec Jackson Steelhead Iron for added weight and beauty.

Size: 5 Hook

Moal leeches are tied entirely on a string with a trailer hook at the back. This gives the fly greater action than a fly tied on a rigid hook. More fish are landed with the Moal fly as well.

 The combination of rabbit fur which has incredible life in the water and flashabou creates an illuminated attraction for fish. A real winner!

Length: 3 inches

Size: 2 trailing hook

This fly is now tied in a classic tie up, and has been a very effective Summer/Fall Steelhead fly.

For lower water and summer conditions this same color pattern can be found in this fly and Skagit Leech Lite.

See other Neo Classic patterns (Click Here)

Tied on a:

• 2051 Alec Jackson Black Spey Hook, Size 3
• Flashabou
• Chartreuse Veevus Holograophic Tinsel, Large
• Black UV Ice Dub
• Black Saltwater Neck Hackle
• Black Ostrich Herl, 10-12 inch
• Guinea Hackle
• Red VEEVUS THREAD 8/0

This fly is now tied in a classic tie up, and has been a super effective Steelhead fly. It first started as the Improved Methow Moal, and then evolved into Skagit Methow Leech (which has the record for catching 20 lb Steelhead).

For lower water and summer conditions this same color pattern can be found in this fly and Skagit Leech Lite.

See other Neo Classic patterns (Click Here)

Tied on a:

• 2051 Alec Jackson Black Spey Hook, Size 3
• Chartreuse Holographic Flashabou
• Chartreuse Veevus Holograophic Tinsel, Large
• Black UV Ice Dub
• Black Saltwater Neck Hackle
• Black Ostrich Herl, 10-12 inch
• Kingfisher Blue Guinea Hackle
• Red VEEVUS THREAD 8/0

Evo Bunny, new for 2018, updated 2019. Tied on a Senyos Articulated Shank, 25mm, Black

A non-weighted, easy to cast Steelhead fly with lots of action.

Tied with a trailing egg. This fly has lots of movement with a free moving Rabbit wing.

Size 2 Owner SSW hook tied with 20 lb mono doubled over.

See all Evo Bunny Flies (click Here)

See Evo Bunny Supreme (click Here)

Swing this fly, Nymph this leech - it works for Steelhead, Trout, Bass, and Walleye.

A good Summer Steelhead Fly, Fall Cutthroat.

Mini-Intruder - Based on Rhea Intruder, this miniature version is tied on a 25mm shank with small brass eyes and real rhea.

Small dumbbell eyes (5/32") helps the fly swim better. Good action.

Length: 2.5 inches

6/10/2019: Two in stock

A custom design by Grabflies. Design idea came from combining the famous Skagit Minnow with the new Intruder style trailing hook. This fly has lots of action in the water.

New Design - now comes tied on Intruder wire junction to hook, so hook can be changed.

A very special pattern tied for the Klickitat River, WA

Size: 3 inch | Size 2 Owner hook

Also see: Neo Skagit Leech with hidden Nickle Bead) (click Here)

Stu Foxall's latest creation is a tube fly utilizing the Pro Sportfisher Ultra Sonic Cones. These cones are made of brass and are slotted. The Ultra Sonic Cone adds some weight to the fly, but is still very easy to lift out of the water due to the venting holes, while maintaining the capability to create a vortex behind the disc, allowing soft materials to swim freely instead of collapsing in hard current.

Very nice tie up. Make sure you take a long some of these on your next Steelhead fishing trip.

Comes with hook.

A very good skating and popular pattern for fishing for  Steelhead on the surface.

Good October Caddisfly imitation.

The Artificial Intelligence (A.I.) is a searching style attractor baitfish pattern. Due to its synthetic build, this fly pattern is extremely durable, lightweight, and provides a serious amount of movement while it swims. The A.I. holds a great profile, retains its shimmer and translucency, and is the perfect option to combat changing water conditions. A proven pattern across the Great Lakes Region to Canadian/Alaskan waters and the West Coast.

This fly has lots of movement for Steelhead.

The Cyclops Leech is designed to get down and keep a profile while moving like a snake. With the 7/32" tungsten bead, this fly will break through the toughest of currents. Rigged with a Gamakatsu Octopus hook.

Nice fly, swims with lots of movement.

The traditional summer steelhead flies were developed on the fabled rivers of the Pacific Northwest, such as the Umpqua, Deschutes, and the Rogue. Our traditional summer steelhead flies are tied on a black nickel, up-turned eye, salmon hook.

Size: 5 hook

The Intruder has quickly become one of the most popular steelhead patterns on the West Coast. It is a large fly that was designed by the West Coast steelhead guide Ed Ward, with the help and feedback of fellow anglers Scott Howell, Jerry French, and Dec Hogan. Since its inception, there have been numerous variations, and it is safe to say that it is more of a style of fly rather than a pattern. 

Our Sili-Leg Intruders are tied on medium length 35mm Waddington Shanks with 3/16-inch brass eyes. Stock flies come with a Gamakatsu Octopus size 2 hook.

Also See:

Using long flowing materials is one of the key Intruder features. The rhea is a small South American ostrich-like bird with long flowing feathers, and it's the perfect match for the Intruder. The use of rhea was popularized by Paul Miller a number of years ago.

Stu's Rhea Intruders are tied on 40mm shanks with 5/32-inch brass eyes. Stock flies come with a Gamakatsu Octopus hook.

Great Steelhead Fly

Stu Foxall's latest creation is a tube fly utilizing the Pro Sportfisher Ultra Sonic Cones. These cones are made of brass and are slotted. The Ultra Sonic Cone adds some weight to the fly, but is still very easy to lift out of the water due to the venting holes, while maintaining the capability to create a vortex behind the disc, allowing soft materials to swim freely instead of collapsing in hard current.

Very nice tie up. Make sure you take a long some of these on your next Steelhead fishing trip.

Mini Intruder - Based on Rhea Intruder, this miniature version is tied on a 25mm shank with small brass eyes and real rhea.

Small dumbbell eyes (5/32") helps the fly swim better. Good action.

A Moal Leech as good as it gets. Tied with hook holder to help prevent hook fouling, and natural Micro Barred Voodoo Fibers

for legs.

Moal leeches are tied entirely on a string with a trailer hook at the back. This gives the fly greater action than a fly tied on a rigid hook. More fish are landed with the Moal fly as well.

Custom Moal Leeches are tied by Grabflies.com in the good old USA. Moal's are tied using the best materials on the market and are tied to last (super glue, Berkley Fireline Braid 20 LB (double over for 40 LB strength) and, quality Owner size 2 hook.

The traditional summer steelhead flies were developed on the fabled rivers of the Pacific Northwest, such as the Umpqua, Deschutes, and the Rogue. Our traditional summer steelhead flies are tied on a black nickel, up-turned eye, salmon hook. Special orders can be tied on Gamakatsu, Daiichi, or Maruto hooks. Size: 4

Green Butt Hilton - great summer and fall Steelhead pattern!

Also Sea Run Cutthroat love it!

The Cyclops Leech is designed to get down and keep a profile while moving like a snake. With the 7/32" tungsten bead, this fly will break through the toughest of currents. Rigged with a Gamakatsu Octopus hook.

Nice fly, swims with lots of movement.

The Egg Sucking Leech is one of the best all around Steelhead flies. Tied by Solitude Fly.

Size 2

The Intruder has quickly become one of the most popular steelhead patterns on the West Coast. It is a large fly that was designed by the West Coast steelhead guide Ed Ward, with the help and feedback of fellow anglers Scott Howell, Jerry French, and Dec Hogan. Since its inception, there have been numerous variations, and it is safe to say that it is more of a style of fly rather than a pattern.

Our Sili-Leg Intruders are tied on medium length 35mm Waddington Shanks with 3/16-inch brass eyes. Stock flies come with a Gamakatsu Octopus size 2 hook.

Also See:

Stu Foxall's latest creation is a tube fly utilizing the Pro Sportfisher Ultra Sonic Cones. These cones are made of brass and are slotted. The Ultra Sonic Cone adds some weight to the fly, but is still very easy to lift out of the water due to the venting holes, while maintaining the capability to create a vortex behind the disc, allowing soft materials to swim freely instead of collapsing in hard current.

Very nice tie up. Make sure you take a long some of these on your next Steelhead fishing trip.

The original Intruder designed by Jerry French and tied by Aqua Flies!

The birth of the Intruder was in the Pacific Northwest. It has gone through many evolutions and surely it will continue to evolve, but Jerry's Intruder as it is tied today is a fish catcher. Tied using composite loops, UV materials and a Gamakatsu trailer hook, confidence is high when using this fly. Jerry's Intruder is approximately 3" long. Single Station Intruder is about 2" in length.

Using long flowing materials is one of the key Intruder features. The rhea is a small South American ostrich-like bird with long flowing feathers, and it's the perfect match for the Intruder. The use of rhea was popularized by Paul Miller a number of years ago.

Stu's Rhea Intruders are tied on 40mm shanks with 5/32-inch brass eyes. Stock flies come with a Gamakatsu Octopus hook.

Great Steelhead Fly

Senyo's OCD is a great fly in low water conditions because it's unweighted and 3 1/2 inches long. Tied using Senyo's articulated shank, ostrich, and Angel Hair, for a fly that swims well in the water. Shank length: 25mm.

Size 2 Intruder hook.

Very nice tie up by Aqua Flies.

Similar to a Fish Taco - good/great fly for Steelhead.

A custom design by Grabflies. Design idea came from combining the famous Skagit Minnow with the new Intruder style trailing hook. This fly has lots of action in the water with a large profile.

This Methow Skagit Leech is a Clear Water version of the original Methow Skagit Leech, which has more black in it. It is tied with a hidden nickle cone, lighter than a bead. The hidden bead helps prop up the Marabou. The fly swims different, and snags less as the bead will not snag on rocks.

New for 2019, Tied with UV2 dyed Marabou, color: King Fisher Blue

Fly is tied and glued in every step of it's construction - tied to last. 

Size: 2.5 - 3 inches | Size 2 Owner hook | Size 1, OPST barbless hook

Also see Neo Skagit Leech, Methow (click here)

Neo Skagit Bijou Leech, Methow (Click Here)

Princess Nymph, Tungsten Bead by Solitude Fly - Size 6

The standard Prince Nymph is a great trout fly that works for steelhead too. This fly has more expensive hair, and more jewelry than the Prince. Hence, the Princess.

Using long flowing materials is one of the key Intruder features. The rhea is a small South American ostrich-like bird with long flowing feathers, and it's the perfect match for the Intruder. The use of rhea was popularized by Paul Miller a number of years ago.

Stu's Rhea Intruders are tied on 40mm shanks with 5/32-inch brass eyes. Stock flies come with a Gamakatsu Octopus hook.

Great Steelhead Fly

This fly has done so well sinse we designed it that we know you're going to like the Flashback Bug – It brings together some of the best features from other popular steelhead wake flies and is made with our own highly visible iridescent foam.

Comes with Owner size 4 hook